The New Product - Flash MK950 for is compatible with Canon camera with the Canon standard hot shoe mount. What's more, the MK950 has some new special part and upgraded the function.
The batteries and camera in above picture are not included
TTL mode, TTL mode is the default mode after turn on flash , through key to adjust exposuring guild number, available adjustable scope is negative 3 positive 3, through the personal needs to setting and using
M Mode, Under the M mode, through the button to adjust the light flash brightness, flash brightness adjusting range is 1/128-1/1. have eight levels brightness, only need to set range of flash brightness when using.
Stroboscopic mode, Under the stroboscopic mode, through the button to adjust the light flash brightness, flash brightness adjusting rang is 1/128-1/1. have eight levels brightness, when press “SET” key, can adjust the Hz of flash, Hz range is 0-90, after finished set then press the “SET” button to adjust times of stroboscopic, stroboscopic adjustable range is 0-50, press “SET” button again to save and quit this setting
S1/S2 Modes, Flash default mode is S1 mode, if when need join the S2 mode, can through press “SET” and if flicker at current mode, can shift another mode through key
S1 Mode, it will work with the first work of the master flash synchronously in this mode, with the suit consistent with the use of radio slave. To use this mode correctly, the master flash should be set at manual flash and the TTL flash system with preflight function and the red-reduction function with multiple flashes should not be used
S2 Mode, It is also called “pre-flash cancel mode”. This mode is similar with S1 mode, but it can neglect the pre-flash given by TTL flash. Therefore it can support the main flash working in TTL mode. In particular, if S1 mode can not flash correctly and synchronous with your internal flash, you can try to use
Test Flash, Whether in any mode, you can press PILOT button to test if the flash light flashed normally. When testing the flash, the flash will give flash at relevant output level in accordance with the chosen output power setting.
|Guide Number||42 meters (ISO 100,85mm)|
|Vertical rotation angle||0-90 degrees|
|Horizontal rotation angle||0-270 degrees|
|Flashing times||100-1500 times (AA alkaline cell used)|
|Recycle time||Approx 3s|
|Brightness control||8 levels of output control (1/128-1/1)|
|External interface||Hot shoe, PC port and eternal charging port|
|Wireless triggering distance||20-30m indoor, 10-12m outdoor|
|Additional Features||Sound indicator, PC port, Power saving mode and over heat protection|
Excelent flash, easy for use, nice price.
Very good product for that money. Easy to use, works well as a slave flash light too.
Purchased one last time and sent it back after 3 months, the hot-shoe contact screw got loose, Linkdelight replaced it with a new one and works fine for me until now. Quality is OK.
I have one of these and I am very satisfied with this product,it is very usefull in low light situation an not only,recycle time is ok(I rare use it at full power) .The only thing that I don like is the green light on LCD,it's on continuously(nevert turn off).But overall is a great product.
great price with great features. been using only for a short while but already impressed with it. only gripe is the LCD display is not viewable at all angles.
Pros: Very simple to use product. Great quality and can't beat the price. Get everything you need with this. Of course it's not the 580 but it has yet to let me down. Speed is great, accurate lighting, no complaints. Definately a must for portraits and indoors photos.