


| Performance Characteristics | |
|---|---|
| Model | SDS8202 |
| Bandwidth | 200MHz |
| Sample rate(Real time) | 2GS/s |
| Sampling rate/relay time accuracy | ±100ppm |
| Horizontal Scale(S/div) | 5ns/div~100s/div,step by 1~2~5 |
| Rise time (at input, typical) | ≤1.7ns |
| Channels | 2 + 1(External) |
| Display | 8″ color LCD, TFT display, 800×600 pixels,65535 colors |
| Input impedance | 1MΩ±2%,in parallel with 15pF±5pF |
| Probe attenuation factor | 1X,10X,100X,1000X |
| Max. input voltage | 400V (PK-PK) (DC + AC PK-PK) |
| Record length | Max.10M points for each channel |
| Interpolation | (sin x)/x |
| Input coupling | DC, AC, Ground |
| Acquisition modes | Sample, Peak Detect and Average |
| Vertical resolution (A/D) | 8 bit resolution (2 channels simultaneously) |
| Vertical sensitivity | 2mV/div~10V/div(at input) |
| DC gain accuracy | ±3% |
| DC accuracy(Average) | Average≥16:±(3% reading+0.05div) for △V |
| Trigger type | Edge, Pulse, Video, Slope, Alternate |
| Trigger mode | Auto, Normal, Single |
| Trigger level | ±6 divisions from screen center |
| Acquisition modes | Sample, Peak Detect and Average |
| Line/field frequency(Video) | Support standard NTSC、PAL and SECAM broadcast systems |
| Cursor measurement | △V and △T between cursors |
| Interval(△T) accuracy(full bandwidth) | Single: ±(1 interval time+100ppm×reading+0.6ns) Average>16:±(1 interval time+100ppm×reading+0.4ns) |
| Automatic measurement |
Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot,Pre-shoot,Rise time, Fall time, +Width, -Width, +Duty, -Duty, Delay A B ,Delay A B |
| Waveform math | +, -, ×, ÷,FFT |
| Waveform storage | 15 waveforms |
| Cymometer | available |
| Lissajou’s figure | Brandwide:Full bandwidth |
| Phase difference:±3 degrees | |
| Power supply | 100V-240V AC, 50/60Hz,CAT II |
| Communication interface | USB2.0 or RS-232, USB flash disk storage, LAN, Pass/Fail |
| Fuse | 1A, T class, 250V |
| Power consumption | <18W |
There are yet no reviews for this product.