Canon EOS 7D Split Screen Installation

Saturday, 28 August 2010 10:52

We only offer an installation instruction as following. The split screen may be not the same, but the installation method is the similar.

 

 

 

Note:

We only offer an installation instruction as following. The split screen may be not the same, but the installation method is the similar.

In the installation instruction, some tools we do not offer, you can use the similar tools to replace.

If you do not have any experience to install the split screen, you will take a few risk of breaking the camera when you install it. So you’d better install it under the guide of the experienced man.

We are not responsible for any broken or damage caused when you install this item, except the quality problem of the item itself.

 

Pls prepare the split screen, tweezer, fingerstall and cleaning your hands, then Start.

Step1 Step2
This is the CANON EOS 7D camera There are two small screws needing to open.
Step3 Step4
Please prepare cross screwdriver and open screws. Open screw, and take out spare part.
Step5 Step6
The yellow arrowhead is focusing screen frame lock
and open direction.
You can use thumb of left hand to open spring lock.
Step7 Step8
Open the frame lock and please take tweezers to clip the
tab of the focusing screen (in the left side)and take out of the camera carefully.
Taking out 7d original screen.(inside of the slice doesn't need to take out ).
Step9
This is split focusing screen for Canon EOS 7D camera,
please adhere to original procedure ~ to install.
~~Then test~~
This is split screen lost focus in the 7d viewfinder
window, focus in the house of back.(24-70/2.8).
Central image enlarges.
Step12 Step13
Focus image (focus in the eye.) Central image enlarges.
Last Updated on Wednesday, 01 September 2010 18:32